KI-DP2-P Series 100W Constant Current DALI-2 dimming LED Driver

·Output Type: Constant Current

·Input Range: 120-277VAC  50/60HZ

·Protections: Short circuit / Over load / Over temperature / Over voltage

·Heat dissipation: Cooling by free air convection

·Waterproof performance: IP20 can be used indoor (EU); Full plastic protection housing,for dry and damp locations (US)

·Design features:

①The maximum output current of each channel can be adjusted individually via NFC, while the maximum output current of each channel is adjusted simultaneously through the switches

②The address size can be set from 0 to 255 via NFC        

③It has the function of lamp temperature detection

④If the DALI signal line is not connected, only the 4th channel of the 4 channels will be output normally, and the remaining 3 channels will be turned off.

⑤If the DALI signal line is connected and all 4 channels are loaded normally, the total power of the 4 channels can reach 100W. If any one or more of them are open or short, the loaded one will be limited to 25% of the maximum output

·Dimming function: DP2 Dimming

·Dimming range: 0.1%-100%

·Application: Suitable for the application of LED lighting

·Warranty: 5 years warranty

·Others: Flicker-free dimming

60W Constant Current DALI-2 dimming LED Driver